The optical reading head, Optical or Optical Probe Head

All our heads read or Optical probes work with optical infrared waves with the individual meter and are compliant to the standard IEC 62056-21 (formerly IEC 1107) and ANSI C12.18. Our products differ mainly on the signal output to the peripheral device.

Your preferred selection method and your reading device set significantly the right product and the output signal (RS-232, RS-485, TTL or USB).

Optical Probe or optical reading head with RS-232 output signal

An optical reading head or Optical Probe is an interface. It is intended for two-way data exchange between a counter such as a electric meter, electricity meter, gas meter, heat meter, water meter, etc. and a peripheral device via infrared optical waves.

The signal output of this model is based on standard serial RS-232 signal.

optical probe OP-333

Optical Probe OP-333

Standard: IEC 62056-21
Output signal: RS-232
Connector: Without Connector

more >>

optical probe OP-300

Optical Probe OP-300

Standard: IEC 62056-21
Output signal: RS-232
Connector: D-Sub 9 Pol - female

more >>

optical probe OP-305

Optical head OP-305

Standard: IEC 62056-21
Output signal: RS-232
Connector: D-Sub 9 Pol - male

more >>

optical probe OP-310

Optical Probe OP-310

Standard: IEC 62056-21
Output signal: RS-232
Connector: HP Standard 22 Pin

more >>

optical probe OP-320

Optical Probe OP-320

Standard: IEC 62056-21
Output signal: RS-232
Connector: Palm universal

more >>

optical probe OP-330

Optical Probe OP-330

Standard: IEC 62056-21
Output signal: RS-232
Connector: DIN 5 Pin male

more >>

optical probe OP-345

Optical Probe OP-345

Standard: IEC 62056-21
Output signal: RS-232
Connector: RJ-10

more >>

optical probe OP-340

Optical Probe OP-340

Standard: IEC 62056-21
Output signal: RS-232
Connector: RJ-45

more >>

The Optical Probe or optical reading head with RS-485 output signal

An optical reading head or Optical Probe is an interface. It is intended for two-way data exchange between a counter such as a electric meter, gas meter, heat meter, water meter, etc. and a peripheral device via infrared optical waves.

The signal output of this model is based with standard serial RS-485.

optical probe OP-400

Optical Probe OP-400

Standard: IEC 62056-21
Output signal: RS-485
Connector: Without Connector

more >>

optical probe OP-410

Optical Probe OP-410

Standard: IEC 62056-21
Output signal: RS-485
Connector: RJ-10

more >>

The Optical Probe or optical reading head with TTL signal output

An optical reading head or Optical Probe is an interface. It is intended for two-way data exchange between a counter such as a electric meter, gas meter, heat meter, water meter, etc. and a peripheral device via infrared optical waves.

The signal output of this model is based standard serial TTL voltage level.

optical probe OP-500

Optical Probe OP-500

Standard: IEC 62056-21
Output signal: TTL voltage level
Connector: Without Connector

more >>

The Optical Probe or optical reading head with USB

An optical reading head or Optical Probe is an interface. It is intended for two-way data exchange between a counter such as a power meter, gas meter, heat meter, water meter, etc. and a peripheral device via infrared optical waves.

optical probe OP-210

Optical Probe OP-210

Standard: IEC 62056-21
Connector: with USB 1

more >>

optical probe OP-205

Optical Probe OP-205

Standard: IEC 62056-21
Connector: with Micro-USB-B

more >>

The ANSI optical probe or head for meter reading

The optical probe or head for meter reading is an interface for a bidirectional data exchange between a meter such as electric meter, gas meter, heat meter, water meter etc. and periphery device such as and a handheld via infrared optical waves.

optical probe AP-333

ANSI Optical Port AP-333

Standard: ANSI C12.18
Output signal: RS-232
Connector: Without Connector

more >>

optical probe AP-400

ANSI Optical Probe AP-400

Standard: ANSI C12.18
Output signal: RS-485
Connector: Without Connector

more >>

optical probe AP-500

ANSI Optical Read-out Head AP-500

Standard: ANSI C12.18
Output signal: TTL voltage level
Connector: Without Connector

more >>

optical probe AP-210

ANSI Optical Head AP-210

Standard: ANSI C12.18
Connector: with USB 1

more >>